Make Your Own Star Wars Lightsaber – Start Feeling The Force Today!

When George Lucus first came up with the concept that is Star Wars I doubt he’d imagined in his wildest dreams just how successful it would become. The original movie Star Wars IV A New Hope was brought to the big screen way back in 1977, audiences around the world were wowed by the amazing special effects and fantasised about a galaxy far far away.

Despite being almost 30 years old Star Wars is as popular now than ever before, thanks largely to the success of the original films and the recent release of the prequels it seems that people young and old are enjoying Star Wars Sager all over again.

Having been dragged up during the 70’s I was caught up in the original hype of the force, Jedi’s and of course Lightsabers. Used by Jedi’s and Sith’s alike this elegant weapon has been a must of every true Star Wars fan wish list since the original movie.

Just imagine how great it would be to have your own Lightsaber. Voooooo-Vooooooo. Come on admit it, we’ve all done it right? You stand by the mirror with a brush in your hand pretending to swing your weapon back and forth in true Obi-Wan style, prenteding to be the Jedi master that you know lies deep inside. No, well perhaps it’s just me then? Well I was only 10 at the time, but the idea to have a Lightsaber has never left me.

Reality check, unfortunately and as much as it pains Lightsabers me to admit it, Sightseers are not real. So the thought of maiming your worst enemy with a laser sword will have to wait for the time being at least.

Still it did get me thinking about Lightsabers and although I couldn’t make a real one. Perhaps I could make a realistic prop, just like the ones used in the films? What I did find surprising is that despite the appeal of Lightsabers there is distinct lack of information with regard to making your own. Most guides at best are patchy and do not provide the detailed information needed.

It’s believed that the original Lightsabers were constructed out of a ‘Glaflex 3 Cell Flash Gun’ but unfortunately these are becoming increasingly rare to locate and are expensive to buy. You could try eBay or other auction websites if you want to go down this route but just be wary of fakes and incomplete parts.

Don’t think either that creating your own Lightsaber is difficult, it’s not. In fact all the parts needed to make your weapon are readily available at your local hardware store. So what are you waiting for, start feeling the force today and build your own Lightsaber.


How to Use a Standard Hot Melt Glue Gun

In crafting, packaging, manufacturing and home improvement, there are many types of adhesives and tools that can be used for applying them. Sometimes you buy supplies that come with a sticky backside, or you use pastes, cold glue, tape or hot melt glue. This article will tell you how to use a standard hot melt glue gun for your project needs.

Instructions

1. Gather all the supplies and materials needed for your project. Place them on a surface that is not too far from an electrical outlet. Take a look at your glue gun. Locate the safety (if there is one) and the metal rest (if there is one).

2. Locate the trigger. Usually this is just behind the barrel of the gun on the underneath side. It should be a solid piece of plastic that looks something like a pie slice. Above the trigger you will see the barrel loader. The glue sticks will go here. Inside this loader is a small, round piece of plastic. This is what will push the glue stick through the barrel. When you pull the trigger, you can watch the plastic squeeze to move with it.

3. Examine the electrical cord on the gun. Make sure mesaproducts there are no breaks in the outer lining and no frays at the base of the gun. Plug the gun into the nearby electrical outlet. Allow it approximately fifteen minutes to reach operating temperature.

4. After the gun has heated, insert a glue stick as far as it will go without forcing it too hard. Now, when you pull the trigger, a small drop of glue will come out of the tip of the gun.

5. Practice gluing on scrap materials before you glue your project materials. This will give you a feel for the trigger pressure and the speed the glue will come out of the gun. Release the trigger and quickly press the tip down onto the surface of your scrap material and pull it to the side. This will break the glue and stop it from stringing out when you pull away. Continue practicing this until you get the proper amount of glue you need for the object you will be using.

6. Start carefully applying glue to your project materials. When you are finished using the glue gun, pull the glue stick slightly back to keep more glue from being unnecessarily melted. Do not remove the glue stick, because it can be used for your next project as well. Always rest the glue gun above a paper towel or a paper plate for protection from unwanted dripping glue.